|
|
The
Polar Cadence Sensor is available as an add on feature for the Polar XTrainer
Plus, Polar S510, S520 and S710, S720, S725x, S625xIt offers a continuous cadence readout so you can simultaneously
monitor your heart rate, speed and cadence side-by-side.
This
unit also uses wireless communication as does the coded T61 chest
transmitter and speed sensors.
Our Price $45 - free shipping with
Heart monitor
purchase For use with XTrainer Plus
Polar S510 and S710,
S720, S725
|
The Polar Speed Sensor is
available separately for the Polar XTrainer Plus, Protrainer XT Cycle,
S510 and S710 as a replacement unit or for multiple
bike applications. It comes with a bike mount.
This unit also uses wireless communication to the heart rate monitor as does the
T61 coded moulded
chest transmitter, cadence and altitude sensors.
The Polar Speed Sensor comes as standard with the Polar cycling
units to allow the continous
monitoring of instantaneous speed. Thus enabling the recording of maximum and average
speeds, trip distance and cumulative distance.
The sensor should be attached 12-20 inches from the bike mounted heart
monitor receiver
which is installed on the right side of the handle bar.Our Price $45
For use with XTrainer Plus
and Protrainer XT, S510 and S710, S725, S625, S720 |
|
| |
Polar
Altitude Sensor
(older unit not readily available get the S725 instead) |
  |
The Polar
Altitude Sensor is available as an add on feature for the Polar XTrainer Plus. In altitude
mode, the XTrainer Plus gives you a continuous readout of your altitude while keeping
track of your total climb. The Polar Altitude Sensor is supplied with a modified bike mount which
replaces the original bike mount provided with the XTrainer Plus. It is fitted in the same
location on the right hand side of the handle bar above the Polar Speed Sensor. The Polar
Altitude Sensor locates in a special recess on the bike mount and the XTrainer Plus is
secured over the top of the unit.
The Polar Altitude
Sensor uses an atmospheric pressure sensor and calculates the altitude by using the
standard average altitude in certain air pressures according to the ISO 2533 standard. The
Polar Altitude Sensor is temperature compensated every 5 seconds.
Our Price $60 -
free shipping with Heartmonitor purchase
For use with XTrainer Plus |
|
Polar Bike Mount
For
any Heart monitor |
The Polar Bike
Mount will hold any Polar Heart Rate Monitor receiver securely around the handlebars or on
any stationary equipment. The Polar Bike Mount comes with the Polar XTrainer Plus and Pro
Trainer XT Cycle, and is sold separately for use with other Polar Heart Rate Monitors or
multiple bike configurations.
|
 |
| Our Price
$12 - free
shipping with heart monitor purchase |
|
Buh-Bump Electrode Cream
$9.00, $16 for 2
$7.20 with heart monitor purchase
Why use Buh Bump with your Polar? 
Sark Products recommends moistening the electrodes of the transmitter for best results. The
current moistening agent by default users is spit. While
unsanitary and disgusting, saliva does work for most people, but its like using
rabbit ears on a TV when you could have cable. It all comes down to getting the
best reception possible. Reception is key to heart rate monitoring. Nothing is more
frustrating to a HRM user than watching their heart rate appear one second and
disappear the next due to lousy reception. Hands down, Buh-bump provides the
best reception possible!
Heart rate monitor technology is awesome and has improved tremendously since
its introduction in 1979, but one problem still remains-the technology relies on an
individual's body chemistry in order to work properly. If you have dry skin, don't
sweat a lot, or you have a hairy chest, your monitor may not function the way it should.
Your monitor should work flawlessly all the time. Buh-bump is an electrocardiograph
cream similar to those used in medical procedures. When applied to the electrodes
of any monitor, the user sees consistent and accurate readings-the monitor works
flawlessly, 100% of the time. Buh-bump works! It's a great product Using
Buh-bump is hassle free. It takes only a small amount of Buh-bump applied directly
to the transmitter electrodes to obtain accurate and consistent readings all the time
from your heart rate monitor. Our 2.5 oz bottle will last you a long time.
|
|